In-Line Piston Filler – Model PI 3100

AUTOMATIC INLINE PISTON FILLER

Construction Features:

• 304 Stainless steel heavy duty welded C frame.
• Special seals or hoses by order.
• Machine mounted on 4 heavy duty casters.
• 1 inch 304 stainless steel machine leveling screws.
• All contact parts are stainless steel, sanitary, teflon, viton and hoses.

Control Panel Features:

• Omron PLC for all machine logic functions
• Three filling options on control panel (Up, Bottom Up and Down).
• Front panel conveyor speed control for machine sold with conveyor.
• Front panel mounted bottle counter, start and Emergency STOP.
• Fiber optic sensors for container gating.
• Expandable to 14, 12 or 10 pistons to increase speed (Depends on piston size).
• No bottle no fill PLC controlled.

Main Components Features:

• Piston filling and charging stroke by power full 6 inch bore air cylinder.
• Lubricated air cylinder to create a smooth and constant filling speed.
• Hardened Stainless steel shafts with linear bearings for nozzle rack movement.
• 8 inch stroke for nozzle up and down movement.
• Hand wheel and shaft mounted stoppers for height and stroke adjustment.
• Hand wheel counter mounted on volume control threaded rod.

Standard Features:

• Nozzle spacing fully adjustable through top or bottom screw.
• Container height adjustment from 11⁄2 to 16 inches high.
• Nozzle stroke adjustments from 0 to 8 inches.
• Adjustable bottle gating system.
• No change parts needed for various types of containers, will work with plastic or glass.
• Air filter-regulator and safety lockout valve included.
• Spacing and additional bottle control obtained by flow controls mounted on air gating
• cylinders.

Electric and Pneumatic Requirements:

• 110 Volts, 60Hz, 15 Amps 20 CFM @ 80 psi.

Download Brochure »